Owning and Operating Costs: Telehandlers
OWNING AND OPERATING COSTS
by Tom Jackson
Telehandlers
Low hours, long lifecycles and a versatile range of applications make for a machine that delivers value for multiple tiers of users for many years.
s with most construction machines, the purchase price of a telehandler pushes into the six figure category. But unlike earthmoving machines that depreciate as their teeth, tracks and components wear out, telehandlers hold their value and give you years of service with very little additional upkeep and investment. And in these times when equipment dollars are hard to come by, a telehandler with the right attachments can perform a number of different applications. To find out more about the owning and operating costs of telehandlers we turned to Jeff Ford, senior manager of marketing communications and Brian Boeckman, product manager for the telescopic material handler line at Skytrack, Lull and JLG. Ford and Boeckman suggested we study the JLG Model G10-55A. It has a 10,000-pound lift capacity with 55 feet of lift height, 42 feet of vertical reach and a 125-horsepower diesel engine. The G10-55A sits near the large end of the telehandler market. Smaller telehandlers, typically around 6,000 pounds of capacity, are used for residential applications. But with the homebuilding market down, the 10,000-pound machines are the most popular right now and finding work in the commercial building and masonry construction, petrochemical and refinery applications and plant and factory building. Determining lifecycle Machine hours are not a good indicator of the lifecycle of a telehandler, Boeckman says. Telehandlers tend to run at idle or low rpms throughout much of their life, hence engine wear is not as pronounced as it is with machines that push or dig dirt and have heavy load factors to deal with. “An engine rebuild is really a pretty minor expense in the overall scheme of things,” he says. “In harsh applications you might see it occur
A
in 5,000 hours. In more normal applications it could be 7,000 to 10,000 hours. It really depends on a number of things.” An industrial application where the machine is being used 24/7 can be quite hard on telehandler, Boeckman says. A more normal or average application would be in construction where it’s working 10 to 12 hours a day. “A masonry application is fairly typical where you use the machine to feed the bricklayers and block layers and the machine is running the whole time those guys are working, going back from the scaffolding to get the block or the mortar and bringing it back up and continuing to make those passes.” A less severe application would be something like a framing job, where the machine places trusses, sheathing or drywall on the upper floors of a building intermittently and then is idled. Different owners Because of their long useful lifecycles, most telehandlers are likely to have more than one owner, says Boeckman. “The first user might be a large rental company or a